Table of Contents
Advertisement
wiper insert, change the rest position of
the windshield wipers to the service
position using the wiper lever.
Raising the wipers to the service
■
position
Within approximately 45 seconds of
turning the power switch off, move the
wiper lever to the
(Canada) position and hold it for
approximately 2 seconds or more.
The wipers will move to the service posi-
tion.
Lifting the windshield wipers
■
While holding the hook portion
the wiper arm, lift the windshield wiper
from the windshield.
LS500h_OM_OM50F42U_(U)
4-3. Operating the lights and wipers
(U.S.A.) or
Lowering the windshield wipers to the
■
retracted position
With the windshield wipers placed on the
windshield, turn the power switch to ON
mode and then move the wiper lever to an
operating position. When the wiper switch
is turned off, the windshield wipers will stop
at the retracted position. Even if the wipers
deviate while the power switch is off, the
wipers will return to the normal position.
When lifting the windshield wipers
■
Do not lift the windshield wipers when
●
they are in the retracted position
below the hood. Otherwise, they may
contact the hood, possibly resulting in
damage to a windshield wiper and/or
the hood.
●
Do not lift a windshield wiper by the
wiper blade. Otherwise, the wiper
blade may be deformed.
of
A
●
Do not operate the wiper lever when
the windshield wipers are lifted. Oth-
erwise, the windshield wipers may
contact the hood, possibly resulting in
damage to the windshield wipers
and/or hood.
NOTICE
193
4
Advertisement
Table of Contents
