Table of Contents
Advertisement
Operating the foldable head restraint
■
using the driver's seat adjustment
switches in front passenger mode (if
equipped)
When the front passenger's seatback
●
angle is adjusted using the driver's seat
adjustment switches in front passenger
mode, the front passenger's head
restraint will operate automatically as fol-
lows:
• When the front passenger's seatback is
moved forward to the upright position,
the head restraint will lower and fold for-
ward when the seatback angle adjust-
ment switch is released.
• When the front passenger's seatback is
moved backward to the upright position,
the head restraint will move to the upright
position when the seatback angle adjust-
ment switch is released.
●
If any of the following conditions are met,
the front passenger's head restraint will
not fold forward even though the front
passenger's seatback angle is being
adjusted using the driver's seat adjust-
ment switches in front passenger mode:
• The power switch is in ACCESSORY
mode or off.
• The weight of an occupant or heavy
object, etc. is detected on the front pas-
senger's seat.
Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger's door is opened then
closed or the power switch is turned off.
• The front passenger's seat belt is fas-
tened.
• The front passenger's door is open. (The
front seat will not move forward.)
• The front passenger's seat is not in the
lowest position.
• The front passenger's seat seat cushion
(front) is not in the lowest position.
• The front passenger's seat seat cushion is
extended (if equipped).
If either of the following conditions is met,
●
the front passenger's head restraint will
not return to the upright position even
though the front passenger's seatback
angle is being adjusted using the driver's
seat adjustment switches in front passen-
LS500h_OM_OM50F42U_(U)
3-3. Adjusting the seats
ger mode:
• The power switch is in ACCESSORY
mode or off.
• The front passenger's seat position is
moved to a position forward of the neu-
tral position.
■
Operating the foldable head restraint
using the front passenger's seat adjust-
ment switches (if equipped)
When the front passenger's head restraint is
folded forward and the front passenger's
door is open, if the front passenger's seat
adjustment switches are used to move the
seat backward or recline the seatback, the
head restraint will move to the upright posi-
tion automatically when the switch is
released.
To stop the operation of the front passen-
ger's head restraint part-way, perform any
of the following operations:
●
Operate any front passenger's seat
adjustment switch.
The head restraint will stop when the seat
position adjustment switch or seatback
angle adjustment switch is operated to
move the seat backward or recline the
seatback, and will resume operating when
the switch is released.
●
Press the "SET" button.
Press the "1", "2" or "3" button.
●
●
Press the seat switch.
Operation of the front passenger's seat
■
using the Center Display will be can-
celed when (vehicles with a foldable
head restraint)
In the following situations, the front passen-
ger's seat cannot be operated using the
Center Display:
●
The power switch is in ACCESSORY
mode or off.
The weight of an occupant or heavy
●
object, etc. is detected on the front pas-
senger's seat.
Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger's door is opened then
closed or the power switch is turned off.
131
3
Advertisement
Table of Contents
