Table of Contents
Advertisement
314
5-1. Remote Touch/Display
5-1.Remote Touch/Display
Remote Touch
The Remote Touch can be used to
operate the Center Display.
For details on the Remote touch,
refer to "NAVIGATION AND
MULTIMEDIA SYSTEM
OWNER'S MANUAL".
Remote Touch operation
Switches
■
"MAP" button
A
Vehicles with navigation function:
Press this button to display the vehicle's
current position.
Vehicles without navigation function:
Press this button to display the compass
mode screen.
"MENU" button
B
Press this button to display the menu
screen.
Back button
C
Press this button to display the previous
screen.
Touchpad
D
Slide your finger on the touchpad and
move the pointer to select a function, letter
and screen button.
Press the touchpad to enter the selected
LS500h_OM_OM50F42U_(U)
function, letter or screen button. Certain
finger movements on the touchpad can
perform functions, such as changing map
scalings and scrolling list screens.
Sub function button
E
When
is displayed on the screen, a
function screen assigned to the screen can
be displayed.
Using the touchpad
■
1
Select: Touch the touchpad to
select the desired button on the
screen.
2
Enter: Buttons on the screen can be
selected by either depressing or
double tapping the touchpad.
Once a button has been selected,
the screen will change.
Touch operation
■
Operations are performed by touching
the touchpad with your finger.
Trace
Trace the pad surface while maintaining
contact with the touchpad. Moving the
cursor and the pointer.
Advertisement
Table of Contents
