Table of Contents
Advertisement
3
Touch the button for the desired
operation.
Touch and hold to move the front
A
passenger's seat forward and fold
the seatback forward.
On vehicles with a foldable head restraint,
the head restraint will also fold forward.
Touch and hold to move the front
B
passenger's seat backward and the
seatback to the upright position.
On vehicles with a foldable head restraint,
the head restraint will also move to the
upright position.
Operating the front passenger's seat
■
from the rear seat
In the following situations, the front passen-
ger's seat cannot be operated using the
Rear Multi Operation Panel:
The power switch is in ACCESSORY
●
mode or off.
The rear seat belt is not fastened and
●
weight is not detected on the rear seat.
Once weight is detected on the seat, the
seat will be judged as occupied until the
rear door is opened then closed or the
power switch is turned off.
The weight of an occupant or heavy
●
object, etc. is detected on the front pas-
senger's seat.
Once weight is detected on the seat, the
seat will be judged as occupied until the
front passenger's door is opened then
LS500h_OM_OM50F42U_(U)
3-3. Adjusting the seats
closed or the power switch is turned off.
●
The front passenger's seat belt is fas-
tened.
The front passenger's door is open. (The
●
front seat will not move forward.)
■
When the front passenger's seat is
folded forward
→P.132
Front seat refresh system (if
equipped)
Pneumatic chambers built into the
front seat apply pressure to the occu-
pant's body at different modes and
intensities.
1
Press the seat switch.
2
Using the Remote Touch pad,
select "Driver Seat Refresh" or
"Passenger Seat Refresh".
3
Select the desired mode.
"Centripetal"
Applies pressure sequentially from the
front of the seat cushion to top of the seat-
back
"Centrifugal"
Applies pressure sequentially from the top
of the seatback to the front of the seat
cushion
"Upper Body"
133
3
Advertisement
Table of Contents
