Fluke Norma 4000 User Manual page 92

Remote Control
Users Guide
Invalidates
-
Invalidated by
[SENSe:]FUNCtion[:ON]
[SENSe:]FUNCtion[:OFF]
[SENSe:]DATA? <function>{,<function>}
[SENSe:]DATA:STATUS? <function>{,<function>}
[SENSe:]FUNCtion:CONCurrent OFF
[SENSe:]FUNCtion:OFF:ALL
Description
This command turns OFF all of the <sensor_function>s that the instrument can
concurrently sense.
Example(s)
FUNC:OFF:ALL
*RST state
-
Invalidates
[SENSe:]FUNCtion[:ON]:COUNt?
Invalidated by
[SENSe:]FUNCtion[:ON]
[SENSe:]FUNCtion:CONCurrent ON | OFF
Description
The CONCurrent command indicates whether the SENSor block should be configured to
SENSe one function at a time or SENSe more than one function at a time (concurrently).
Parameter(s)
ON
OFF
Example(s)
FUNC:CONC ON
FUNC:CONC?
*RST state
ON
Invalidates
[SENSe:]FUNCtion[:ON]:COUNt?
[SENSe:]FUNCtion[:ON]
4-44
If CONCurrent is ON, the function(s) specified as parameter(s) to the FUNCtion[:ON]
command are turned on, while the state of other functions is set to off.
If CONCurrent is OFF, the FUNCtion[:ON] command acts as a one-of-n switch selecting
the indicated function to be the only sensed function.
Response: 1