STATus Subsystem
The STATus subsystem contains the commands for the status reporting system (see
section "Status Reporting System"). *RST does not influence the status registers.
Command
STATus
:OPERation
[:EVENt]?
:CONDition?
:ENABle
:PTRansition
:NTRansition
:QUEStionable
[:EVENt]?
:CONDition?
:ENABle
:PTRansition
:NTRansition
:VOLTage
[:EVENt]?
:CONDition?
:ENABle
:PTRansition
:NTRansition
:CURRent
[:EVENt]?
:CONDition?
:ENABle
:PTRansition
:NTRansition
STATus:QUEStionable:VOLTage:CONDition?
Description
Returns the contents of the condition register associated with the status structure defined
in the command. Reading the condition register is nondestructive. The response is (NR1
NUMERIC RESPONSE DATA) (range: 0 through 32767).
Parameter
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 65535
0 to 65535
Remote Control - Description of Commands
Commands and Queries
Default
Value/Unit
Query only
Query only
Query only
Query only
Query only
Query only
Query only
Query only
Remark
4-85
4