Measurement Status LEDs
The Meter has a status light for visual feedback about the
measurement. Green and red LEDs show the
measurement status and that a good measurement has
been taken. Table 4 is a list of the status as the LED
changes color.
Table 4. LED Status
90˚
Status
Push . Meter is ready for data
Green Off
measurement.
Push the sensor tip onto the test surface,
on solid metal, as close as possible to the
Green On
bearing. Apply the compression force until
green LED is off.
Green Off
Data measurement is complete.
Error, insufficient force or time duration, no
Red On
data measurement.
Vibration Meter
Before You Start
gqi07.eps
Description
7