Upgrading And Migrating; Hardware - Lexmark MX320 Series User Manual

Upgrading and migrating

Upgrading and migrating

Hardware

Available internal options
•
Flash memory
–
Fonts
Installing an optional card
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet, and then from the printer.
3
Open the controller board access cover.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any components or connectors.
4
Unpack the optional card.
Warning—Potential Damage: Do not touch the connection points along the edge of the card.
106