Lexmark MX320 Series User Manual page 104

Troubleshooting
Scanner does not close
Action
Remove obstructions that keep the scanner unit open.
Did the scanner unit close correctly?
Scanning takes too long or freezes the computer
Action
Step 1
Close all applications that are interfering with the scan.
Does scanning take too long or freeze the computer?
Step 2
Select a lower scan resolution.
a
From the control panel, navigate to:
> Scan To >
b
Adjust the resolution.
Does scanning take too long or freeze the computer?
Scanner does not respond
Action
Step 1
a
Check if the printer is turned on.
b
Resolve any error messages that appear on the display.
c
Copy or scan the document.
Is the scanner responding?
Step 2
a
Check if the power cord is connected properly to the printer
and the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire
or electrical shock, connect the power cord to an
appropriately rated and properly grounded electrical outlet
that is near the product and easily accessible.
b
Copy or scan the document.
Is the scanner responding?
> Scan Settings >
Yes No
The problem is Contact
solved. support.
Yes No
Go to step 2. The problem is
solved.
Contact customer The problem is
support. solved.
Yes No
The problem is Go to step 2.
solved.
The problem is Go to step 3.
solved.
104
customer