Assembling The Knee Pad To The Mast Assembly; Assembling The Foot Plate To The Mast Assembly - Invacare Roze User Manual

Invacare® Roze™
4.4 Assembling the Knee Pad to the Mast
Assembly
The knee pad may be removed from the stand assist
lift for storage or transporting. The knee pad MUST
be properly secured to the mast assembly before use.
1. Push the knee pad A down into position on the knee
pad mounting bracket B on the mast assembly.
2. Put the fix block C in place on the knee pad mounting
bracket.
3. Insert the quick release knob D through the mounting
bracket, knee pad and fix block.
4. Tighten the quick release knob.
5. To adjust the knee pad, refer to Adjusting the Knee Pad
Height in the Maintenance section of the manual.
20
4.5 Assembling the Foot Plate to the Mast
Assembly
1. Rotate the foot plate A up and place the hooks
attached to the foot plate onto the top mounting bolts
B in the mast assembly C.
2. Rotate the foot plate down towards the base assembly.
The bottom of the foot plate will rest against the
bottom bolts D on the mast assembly.
3. Ensure that the foot plate is level and secure.
1195052-B