Replacing Rear Casters; Replacing Front Casters - Invacare Roze User Manual

Stand assist patient lift
Hide thumbs Also See for Roze:
Table of Contents

Advertisement

Invacare® Roze™
9. To replace the actuator(s), reverse STEPS 5-7.
10. Reverse STEPS 3–4 to replace the small base covers and
large base cover.

8.7 Replacing Rear Casters

This procedure should only be performed by a
qualified technician.
54
1. Place the lift on its side.
2. Remove the bolt A and locknut B that secure the
existing rear caster C and bearing D to the rear caster
bracket E.
3. Install the bolt through the rear caster bracket, bearing
and new rear caster. Apply thread locker and tighten
securely with the locknut.

8.8 Replacing Front Casters

This procedure should only be performed by a
qualified technician.
1195052-B

Advertisement

Table of Contents
loading

Table of Contents