5.5 Activating a Mechanical Emergency Release
There are two types of mechanical emergency release —
primary and secondary.
5.5.1 Primary Emergency Release
A
1. Insert a pen into the hole labeled Emergency Up A or
Emergency Down B on the control box C.
Pen must remain in position within the hole for the
Emergency Release to function. Removal will stop
the lowering.
1195052-B
5.5.2 Secondary Emergency Release
B
In cases where the primary release is either not functioning
or unreachable, a secondary emergency release may be
used.
1. Pull up on the EMERGENCY grip A and push down on
the lift arms B at the same time.
It is recommended that the primary emergency
release be used. The secondary emergency release
is only a back-up to the primary emergency release.
Usage
25