Attaching The Battery Charger Mounting Bracket To The Mast Assembly - Invacare Roze User Manual

Invacare® Roze™
7. Install the two remaining mounting screws D through
the mounting bracket and into the wall. Tighten
securely.
8. Plug the battery charger into the wall electrical outlet.
LED light indicating ON should illuminate.
4.8 Attaching the Battery Charger Mounting
Bracket to the Mast Assembly
22
A = Battery and battery charger shown in place on
mast assembly.
1. Remove and dispose of the two mylar pieces covering
the mounting holes on the back of the mast assembly.
2. Insert the hook screws into the mounting holes.
3. Tighten the hook screws.
4. Mount the battery charger mounting bracket on the
hook screws.
5. Charge the battery. Refer to Charging the Battery in the
Usage section of the manual.
1195052-B