Password-Control Enable - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Password Control
# Configure the minimum password length of the system login passwords to eight
characters.
[3Com] password-control length 8
# Configure the number of password attempts allowed for each user to five.
[3Com] password-control login-attempt 5
# Configure the maximum number of history password records allowed for each user to
10.
[3Com] password-control history 10
# Configure the alert time when users are alerted to their forthcoming expiration to
seven days ahead of their expiration times.
[3Com] password-control alert-before-expire
# Configure the timeout time of the user password authentication to 100 seconds.
[3Com] password-control authentication-timeout 100
# Configure the maximum number of password attempts to five, and configure the
system to allow the attempt failure user to re-log into the device 360 minutes after the
failure.
[3Com] password-control login-attempt 5 exceed locktime 360

1.1.6 password-control enable

Syntax
password-control { aging | length | history } enable
undo password-control { aging | length | history } enable
View
System view
Parameter
None
Description
Use the following password-control enable commands to enable various password
control functions of the system:
Use the password-control aging enable command to enable password aging.
Use the password-control length enable command to enable the limitation of the
minimum password length.
Use the password-control history enable command to enable the history password
recording.
Chapter 1 Password Control Configuration Commands
7
6