Omron BU100RS Instruction Manual page 57

3 Check and start operation
3-5 UPS operation mode settings
Output signal
Input signal
56
6. Dry contact logic setting (BU,BL,TR,WB)
Four types of output signal can be set On/Off (See also "6-1 Contact signal
functions").
7. Dry contact test (BL/TR/BU/WB/BS/remote)
● Four types of output signal can be forcibly turned ON.
● The ON/OFF state of two types of input signal can be checked with the status
indicator and the beeper.
Signal input/output test start
ON
Battery Low signal (BL)
OFF
ON
Trouble signal (TR)
OFF
ON
Backup signal (BU)
OFF
ON
Deteriorated battery signal
(WB)
OFF
ON
Backup power supply stop
signal (BS)
OFF
ON
Remote ON/OFF signal
OFF
ON
Beep
OFF
While the signal is being input,
the status indicator blinks and
Signal output test
Contact signal is forced to turn ON.
While the signal is being input, these status
indications blink and the beep sounds.
Signal input/output test end
Signal input test
the beep sounds.
BU100RS