Table of Contents
Advertisement
2 Installation and connection
2-1 Installation
Be sure to mount the UPS into the bottom shelf of a rack.
● There is a risk of injury if the product falls.
● This product is a heavy object. If it is mounted into the top part of the rack and falls,
it may cause damage to other equipment.
To mount into a rack, tighten the screws well so that there is no gap
between the ear brackets of the product and the rack.
● A gap may cause the product to fall.
To mount or remove, do not apply load to the product such as pulling a
cable.
● Applying load may cause the product to fall.
24
Caution
(for installation and connection)
Periodically check that the screws are not loose and that there is no gap
between metal sheets.
● A loose screw may cause damage to the product.
If mounting the UPS with both front and rear mount rails, use a 19" rack
support angle mounting bracket set (BAP100RS).
● For details about how to mount UPS, refer to the instruction manual for
BAP100RS.
Notes
BU100RS
Advertisement
Table of Contents
