Changing An Entry In The Dialing Translation Table - Nortel CallPilot 100 Set Up And Operation Manual

Changing an entry in the Dialing Translation Table

After you build a Dialing Translation Table, you can change the Input and Output values of an
entry at any time.
To change an entry in the Dialing Translation Table
1 Start CallPilot Manager.
2 Click the Configuration heading.
3 Click the Dialing Translation Table.
The Dialing Translation Table page appears.
4 Click the Change link for the value you want to change.
The Dialing Translation Setup page appears.
5 In the new value in the Input Value or the Output Value box.
6 Click the Submit button.
CallPilot Message Networking Set Up and Operation Guide
Chapter 3 Setting up AMIS 37