Nortel CallPilot 100 Set Up And Operation Manual page 59

15 In the Connect to box, type the extension number or telephone number you are using to record
the mailbox name.
For a local extension, just type the extension number. For a telephone number that is not a
local extension, type the sequence of digits that dial the telephone number from the voicemail
system. For example, you might need to dial 9, the area code, and then the telephone number.
16 Click the Record button.
The telephone rings.
17 Pick up the handset. Do not use Handsfree. After the tone, record the Network Site mailbox
name.
18 After you finish recording, click the Stop button.
19 To listen to the recording, click the Play button, or to save the recording, click the Save
button.
20 Click the Close button and replace your telephone handset.
21 On the Network Site Mailbox page, click the Submit button.
Chapter 5 Network Delivery Mailboxes
CallPilot Message Networking Set Up and Operation Guide
59