About Creating Network Delivery Mailboxes - Nortel CallPilot 100 Set Up And Operation Manual

56 Chapter 5 Network Delivery Mailboxes

About creating Network Delivery Mailboxes

Before you create a Network Delivery mailbox you must:
• know what leading digit you want to assign to all Network Delivery Mailboxes. This is
optional. You can assign the same leading digit to mailboxes to help you to identify the
different types of CallPilot mailboxes. For example, all Subscriber mailboxes can start with 4,
Guest mailboxes with 5, and Network Delivery Mailboxes with 6.
• know the mailbox length of the mailboxes on your system. The Network Delivery Mailbox
length must be the same length as the other mailboxes on the system; if the mailbox length is
three digits, the Network Delivery Mailbox must also be three digits.
• know the destination site prefix and the destination mailbox number.
• add the site for which you are creating the Network Delivery Mailbox. For information on
creating a site refer to
Note: After you create a Network Delivery Mailbox you must initialize it.
Take these precautions if you set up a remote Group List as a target for a Network
Delivery Mailbox:
If you set up a Group List where either situation happens, a loop occurs where a single
message can generate many copies of the message.
N0008713 01
"Creating a network site" on page
• Do not send messages to a group list that includes a Network Delivery Mailbox
whose target is the mailbox you sent the message from.
• Make sure that you do not have any Group Lists that send messages to each
other through a Network Delivery Mailbox. For example, a Group List that
contains a Network Delivery Mailbox that forwards the message to another
Group List. This Group List also contains a Network Delivery Mailbox, and this
Network Delivery Mailbox forwards the message back to the original Group
List.
45.