Roland VS-2480 Owner's Manual page 364

28—UTILITY Menu Parameters
LOCATOR/SCENE TYPE
The LOCATOR/SCENE TYPE parameters activates or de-activates the Safe mode for
selecting locators and scenes, as described on Page 187 and Page 146, respectively.
NUMERICS TYPE
With NUMERICS TYPE set to:
•
•
RETURN TO LOCATE Sw
You can set the VS-2480 so that the keypad defaults to the selection of locators—
automatically exiting Scene mode after a scene is selected—as described on Page 145
and on Page 187.
EDIT POINT Sw TYPE
Edit Point Sw Type sets the behavior of the IN, OUT, FROM and TO buttons. See
"Configuring the Behavior of the IN, OUT, FROM and TO Buttons" on Page 247.
UNDO MESSAGE
This parameter turns the displaying of the Undo list (Page 72) on or off. If you press
UNDO when the parameter's set to:
•
•
EDIT MESSAGE
When you perform various types of editing on the VS-2480, you can view edit messages
that allow you to adjust parameters relating to the edit—see "Edit Messages" on
Page 240.
You can toggle this parameter on and off by holding down SHIFT and pressing
PHRASE•REGION•AUTOMIX.
PAN KNOB AUTODisp
When the PAN-AUX SEND 1-8 knobs are controlling panning (Page 139), the VS-2480
can automatically jump to a screen that displays PAN values as soon as you turn one of
the knobs. Set PAN KNOB AUTODisp to:
•
•
364
Up—numbers are entered from the numeric keypad or a keyboard from right to
left, like a calculator.
Down—numbers are entered from left to right.
Off—the last action is reversed immediately. This setting lets you undo the most
recent action in the fastest way possible.
On—the Undo list appears, allowing to select the desired Undo level.
Off—so that turning a PAN/AUX SEND 1-8 knob to set a channel's panning doesn't
cause the display to change.
CH VIEW—so that turning a PAN/AUX SEND 1-8 knob to set a channel's panning
causes the VS-2480 to jump to the channel's CH EDIT VIEW screen (Page 150).
www.rolandus.com Roland VS-2480 Owner's Manual