Creating A New Automix Event; Deleting An Automix Event; Micro-Editing Automix Data - Roland VS-2480 Owner's Manual

26—Automix
On the AUTOMIX MICRO EDIT screen, you can individually edit the location and
value of any Automix event. You can also delete any events you no longer want, and
create new ones if you so choose.
To leave the AUTOMIX MICRO EDIT screen, press F6 (EXIT).

Micro-Editing Automix Data

1. To view the desired Automix track's data, press F1 (Tr Inc) or F2 (Tr Dec) to move
2. Press
You can see the changes you make in the data window above the phrase list.

Deleting an Automix Event

1. Press
2. Press F4 (DELETE) to erase the selected Automix event.

Creating a New Automix Event

1. Press
If you can find an event at the desired location that's the same type of Automix event as
the one you want to create, select it to save time.
2. Press F3 (CREATE) to place a copy of the currently selected Automix event at the
3. Edit the new Automix event's location and value as desired.
If you create a new event on an Automix track with no other events, the VS-2480 creates
a Level event.
Undoing an Automix Micro-Edit
1. Press F5 (UNDO). Until you record more Automix data or perform a new Automix
338
higher or lower, respectively, through the currently targeted Automix tracks. The
current track's name and data is shown above the list of its Automix events.
or to select the desired event in the list, and:
• To change an Automix event's location—Use
time measurement. You can select time code or measures/beats/ticks. Turn the
TIME VALUE dial to select the desired start location.
• To change an Automix event's value—Use
and turn the TIME VALUE dial to select the desired value.
or to select the event in the list.
or to select an Automix event of the type you want to create.
selected event's location.
edit, you can press F5 (REDO) to reverse the undo.
www.rolandus.com
and to select the desired unit of
and to highlight the event's value
Roland VS-2480 Owner's Manual