Positioning A Signal In The Surround Field - Roland VS-2480 Owner's Manual

25—Surround
Certain parameter values change when you turn on Surround mode.
Parameter type:
Input and track channel CH
EDIT parameters
FX return channel CH EDIT
parameters
MASTER EDIT parameters

Positioning a Signal in the Surround Field

Each input, track and FX return channel has its own Surround controls that let you
place its signal at the desired location within the three-dimensional Surround field. You
can position a channel's signal from its CH EDIT VIEW page, or from its dedicated CH
EDIT SURROUND screen that presents a large graphic representation of the signal's
Surround position.
1. Press the FADER button that selects the group of channels containing the one
2. Press the desired channel's CH EDIT button.
3. If "Surrnd" isn't visible above F2, press PAGE until it is.
4. Press F2 (Surrnd) to view the CH EDIT SURROUND screen.
322
whose Surround position you want to set.
At the bottom of the CH EDIT VIEW screen, you see that Surround parameters
have replaced the Aux bus send controls for the Aux busses used by the selected
Surround format.
Input and track channels
These parameters are the same as those found on the channel's CH EDIT
SURROUND screen—they're available here to provide a quick way to adjust a
channel's Surround position as you work with its other CH EDIT parameters. We'll
describe how the Surround parameters work in our discussion of the CH EDIT
SURROUND screen.
www.rolandus.com
What Happens:
• ChLink is turned off for any linked channels.
• Surround placement controls replace the Aux bus send
controls for any Aux busses used by the selected
Surround format.
• The ASSIGN parameter is turned off for any Aux
busses used by the selected Surround format.
• Surround placement controls replace the Aux bus send
controls for any Aux busses used by the selected
Surround format.
• The level controls of Aux busses used by the selected
Surround format become Surround speaker master
level controls.
• If any Aux busses used by the selected Surround
format are linked, they become unlinked.
3+2+1 Surround position parameters
Roland VS-2480 Owner's Manual
FX return channels