Activating Phrase Pad Mode; Playing The Pads In Phrase Pad Mode; Sequencing A Phrase Pad Performance; Activating Phrase Sequence Mode - Roland VS-2480 Owner's Manual

Activating Phrase Pad Mode

1. Press PHRASE PAD PLAY•PHRASE SEQ, and:
2. To turn off Phrase Pad mode, repeat Step 1.

Playing the Pads in Phrase Pad Mode

When the PHRASE PAD PLAY•PHRASE SEQ button is green—and when all of the
desired PHRASE PAD buttons are lit amber—you can play the pads, either by
themselves or along with your project as it plays back.

Sequencing a Phrase Pad Performance

Activating Phrase Sequence Mode

1. Hold down SHIFT, and press PHRASE PAD PLAY•PHRASE SEQ:
2. To turn off the phrase sequencer, repeat Step 1.

The PHRASE SEQ STATUS Buttons

The PHRASE SEQ STATUS buttons set the behavior of the phrase
sequencer's tracks—each PHRASE SEQ STATUS button controls the
corresponding sequencer track. Every time you press a PHRASE SEQ
STATUS button, its color—and the state of the sequencer track it
controls—changes. When a PHRASE SEQ STATUS button is:
•
•
•

Playing the Pads in Phrase Sequence Mode

To play a phrase pad along with your hard disk recorder tracks in Phrase Sequence
mode, set its PHRASE SEQ STATUS button as follows:
•
•
When a phrase sequencer track's PHRASE SEQ STATUS button is red, its pad plays
only when the phrase sequencer is actually recording.
Roland VS-2480 Owner's Manual
• the button lights solid green to show that the phrase pads are
now turned on.
• the PHRASE PAD buttons turn amber for each track channel
whose PhrPAD parameter is turned on.
• the button lights solid red to show that the phrase sequencer is
now turned on.
• the PHRASE PAD buttons are amber for each track channel
whose PhrPAD parameter is turned on.
amber—you can manually play the sequencer track's phrase pad.
red—the sequencer track is armed for recording. When the
sequencer's recording, anything you play on its PHRASE PAD
button is recorded (or "written") onto the sequencer track.
green—the sequencer track is set to play back (or "read") anything
recorded on it.
When you want to play along without recording into the phrase sequencer, press
the pad's PHRASE SEQ STATUS until it's lit amber.
To record your phrase pad performance onto its corresponding sequencer track,
press the pad's PHRASE SEQ STATUS button until it's lit red.
21—Using the Phrase Pads
www.rolandus.com
PHRASE
PAD PLAY
PHRASE
SEQ
PHRASE
SHIFT
PAD PLAY
+
PHRASE
SEQ
PHRASE SEQ
STATUS
button
1
17
PHRASE SEQ
/ AUTOMIX
MANUAL
WRITE
READ
275