7—Project and Drive Operations
Amount of Recording Time with Each Recording Mode
This chart shows the number of minutes you'd get when recording a single track in a
single 10G partition. The available time depends on the selected sample rate.
Mode:
M24
MTP
CDR
M16
MT1
MT2
LIV
LV2
Creating a New Project
1. Press PROJECT.
2. If "NEW" isn't visible above F2, press PAGE until it is.
3. Press F2 (NEW)—the PROJECT NEW screen appears.
4. Set the Copy System Prm parameter to:
5. Set the Copy Mixer/Scene Prm parameter to:
Since scenes remember effect patch edits, copying scenes lets you move effect settings
from the current project into the new one you're creating.
6. Select the desired sample rate and recording mode (Page 96).
7. Name the new project.
You can re-name the project later on—and add a comment, if you like—using the
project NAME operation (see Page 99).
98
96k
88.2k
662
721
1,989
2,165
994
1,082
994
1,082
1,989
2,165
2,651
2,885
3,181
3,462
3,977
4,329
•
Off—to create a new project with default UTILITY menu parameter values
(UTILITY menu parameters are described in Chapter 28).
•
On—to copy the current project-related UTILITY parameter values into the
new project.
•
Off—to create a new project with default mixer settings and no scenes.
•
On—to copy the mixer settings and scenes from the currently loaded project
into the new project.
www.rolandus.com
64k
48k
993
1,324
2,983
3,977
1,491
1,989
1,491
1,989
2,983
3,977
3,976
5,302
4,772
6,362
5,966
7,955
Roland VS-2480 Owner's Manual
44.1k
32k
1,442
1,987
4,329
5,966
2,165
2,983
2,165
2,983
4,329
5,966
5,771
7,953
6,925
9,543
8,558
11,932
PROJECT menu
F2 (NEW)