Vsr-880 Settings - Roland VS-2480 Owner's Manual

Supplemental Information
If the AE-7000's
CLOCK SOURCE is:
R-BUS
WORD CLOCK
INPUT A
DIGITAL OUT TYPE
This parameter selects the type of digital audio signals to be output from the
AE-7000. You can select:
•
•
COPY PROTECT
When COPY PROTECT is on, SCMS copy-protection is embedded in S/P DIF digital
audio transmitted from the AE-7000—to transmit this type of audio, TYPE2 must be
selected as the DIGITAL OUT TYPE (see above). This copy-protection prevents the
creation of further copies of the digital audio. To disable copy-protection, turn COPY
PROTECT off.

VSR-880 Settings

CH STATUS 1-8
You can set the status of each track on an R-BUS-connected VSR-880. You can choose:
•
•
•
•
392
This means that
the AE-7000:
derives master clock from the VS-2480.
derives its clocking from the word clock
device connected to its rear-panel
WORD CLOCK jack.
uses the master clock received by its
INPUT A jack.
TYPE1—to produce digital audio that conforms to AES/EBU standards for use by
professional broadcast and recording studios. Use this setting if you wish to send
digital audio from the VS-2480 to a ProTools™ system.
TYPE2—to produce S/P DIF digital audio for devices such as DAT and MiniDisc
recorders.
SRC—to listen to the track's source signal.
PLY—to set the track so that it plays back any audio recorded on the track.
REC—to arm the track for recording.
MUT—to turn the track off.
www.rolandus.com
Set the VS-2480's
MASTER CLOCK to:
a clock source other
than the AE-7000's
R-BUS jack.
the AE-7000's
R-BUS jack.
the AE-7000's
R-BUS jack.
Roland VS-2480 Owner's Manual