Jøtul GF 160 DV IPI Installation And Operation Instructions Manual page 16

139894 GF 160 DV IPI 12/17
Exhaust Baffle
Figure 7.4. Upper Baffle, LP conversion.
8. Baffle Conversion - PROPANE ONLY:
• Remove two, 10 mm nuts to detach and drop the
Exhaust Baffle. You do not need to remove it from the
firebox. See Fig. 7.4.
• Loosen two, 10 mm nuts on the Upper Baffle,
(Figs. 7.4 and 7.4a), enough to break both end wings off
at the perforations. Retighten the two nuts.
• Replace the Lower Baffle.
9. Replace the Burner. Tilt the burner assembly downward
to engage the venturi tube with air shutter assembly.
BE CERTAIN THE BURNER IS LEVEL AND SECURELY
ENGAGED WITH THE FRONT SUPPORTS ON THE
FIREBOX FLOOR.
10. Remove the Utility Panel from the rear leg. Fig. 7.5.
Remove the upper M6 bolts and loosen the lower bolts.
Remove the panel by tilting it forward and off of the
lower bolts.
16
Upper Baffle
Figure 7.4a.
Break off the Upper Baffle wings, LP conversion.
Figure 7.5. Remove Utility Panel.
Remove
Upper Baffle
wings
Upper M6
bolts
Lower M6
bolts