Jøtul GF 160 DV IPI Installation And Operation Instructions Manual page 15

Figure 7.1.
Push Air Shutter stem FULLY back to disengage burner from
injector.
Remove sheet
metal screw.
Air
Shutter
Head
Injector
Install
Lock
Screw -
LP ONLY
Figure 7.3.
Injector and Pilot conversion. The LP shutter lock screw
sets the minimum shutter opening for propane.
Remove Pilot
Shield.
Loosen pilot
base.
Figure 7.2. Remove Burner.
INSTALLER NOTE:
Pilot Shield is removed for
PROPANE in a Minimum Vent Run.
For taller vent configurations, or
where high winds are present,
the shield can remain installed if
nuisance outages are experienced.
Keep the Pilot Shield for potential
future replacement.
P L
Red LP indicator
GF 160 DV IPI 12/17
15