Table of Contents
Advertisement
Other Features
Using the [
1
Press PARAMETER [
2
Press the VALUE [
Here are some examples of operation in Standard Mode.
Value
IMMEDIATE
WAIT FOR A NUM
RESET NUMBER
3
When you've finished making the settings, press [UTILITY] or [EXIT].
Limiting the Range of Banks That Can Be Switched
(Bank Extent)
You can set an upper limit on the banks that can be switched, thus limiting the range
of banks that are switched and allowing you to select only the patches required.
1
Press PARAMETER [
2
Press VALUE [
3
When you've finished making the settings, press [UTILITY] or [EXIT].
48
] [
] Pedals to Make the Settings
] [
] to select "SYS:Bnk Chg Mode."
] [
] to program the settings.
Explanation
Program changes are transmitted immediately when [
[
] is pressed.
Example) When starting from "003," pressing [
neously transmits PC#8.
Program changes are transmitted when a number pedal is
pressed after [
] or [
Example) Starting from "003," after [
green number pedal indicators are flashing, pressing number
pedal 8 outputs PC#8.
Although program changes are transmitted immediately when
[
] or [
] is pressed, just as with Immediate, in this case, the
number furthest to the left is output.
Example) If starting from "003," pressing [
transmits PC#6.
] [
] to select "SYS:Bank Extent."
] [
] to set the upper limit on the banks.
] simulta-
] is pressed.
] is pressed and all of the
] simultaneously
] or
This is enabled only when PC
Mode is set to EFFECTS.
Hide quick links:
Advertisement
Table of Contents
