Setting The Midi Transmit Channel; Setting The Device Id; Setting The Bank Select Output - Roland FC-300 Owner's Manual

Other Features

Setting the MIDI Transmit Channel

This sets the Transmit Channel of the MIDI messages.
1
Press PARAMETER [
2
Press VALUE [
3
When you've finished making the settings, press [UTILITY] or [EXIT].

Setting the Device ID

This sets the Device ID used for transmitting and receiving system exclusive
messages.
1
Press PARAMETER [
2
Press VALUE [
3
When you've finished making the settings, press [UTILITY] or [EXIT].

Setting the Bank Select Output

This setting determines whether or not Bank Select messages as well as Program
Change messages are transmitted in Standard Mode.
1
Press PARAMETER [
2
Press VALUE [
Value
OFF
ON (MSB INC)
ON (LSB INC)
3
When you've finished making the settings, press [UTILITY] or [EXIT].
52
] [ ] to select "MIDI:Tx Channel."
] [ ] to set the transmit channel.
] [ ] to select "MIDI:Device ID."
] [ ] to set the Device ID.
] [ ] to select "MIDI:Bnk Sel Out."
] [ ] to make the setting.
Explanation
Bank Select messages are not transmitted.
The Bank Select (MSB) message is incremented (or decremented) by
one when the Program Change is incremented (or decremented).
The Bank Select (LSB) message is incremented (or decremented) by
one when the Program Change is incremented (or decremented).