Changing The Sounds With The Knobs As You Play (Direct Edit); Using The Switches, Pedals, And Midi To Control The Sounds (Control Assign) - Roland VG-99 Owner's Manual

Chapter 8 Other Functions
Changing the Sounds with
the Knobs as You Play
(DIRECT EDIT)
You can assign parameters to the F1–F6 knobs to control the
parameters as you play.
Additionally, you can check (display) the assigned parameters by
pressing [F1]–[F6].
1.
Press [CONTROL ASSIGN]
2.
Press PAGE [ ] to go to the last page.
3.
Press [F6] (F1–F6) to enter the DIRECT EDIT
screen.
The DIRECT EDIT screen appears.
4.
Press Page [ ] [
knob you want to set.
5.
Use the [F1]–[F6] or F1–F6 knobs to select the
parameters you want to assign to the knob.
6.
If you want to save the edited settings,
perform the Write procedure (p. 38).
* If not saving the settings, press [EXIT] to return to the Play screen.
82
] to go to the page for the
Using the Switches, Pedals,
and MIDI to Control the
Sounds (CONTROL ASSIGN)
These settings are made when parameters are to be controlled with
the GK-3 VOLUME knob or DOWN/S1, UP/S2 switches, the VG-
99's CONTROL buttons, an external pedal or other connected
controller, or a connected MIDI device.
In addition to settings already assigned to controllers, the VG-99 also
features sixteen prepared general-purpose control assigns that let
you freely assign settings to controllers as you like.
* If you intend to control the parameters of effects and the like, be sure to
set the effect to ON beforehand.
* For more detailed information on the parameters, refer to
"CONTROL ASSIGN" (p. 150),
* Enabling the settings requires setting each of the controller
assignments to ASSIGNABLE in the SYSTEM CONTROL ASSIGN
screen. For detailed information, refer to "Setting the GK VOLUME
Control and Switch and the Pedal Function (SYSTEM
CONTROL ASSIGN)" (p. 49).
1.
Press [CONTROL ASSIGN]
2.
Select the controller you want to set with
PAGE [ ] [ ] and [F1]–[F6].
The various controllers' setting screens appear.
* The following section describes the controllers you can set.
Displayed
screen
GK VOL
GK VOL
S1, S2
GK S1, S2
CTL1
CONTROL1
CTL2
CONTROL2
Controller
Settings for the volume knob on the
GK-3.
Settings for the switches on the
GK-3.
Settings for the CONTROL 1 But-
ton on the VG-99's top panel.
Settings for the CONTROL 2 But-
ton on the VG-99's top panel.