Patch Mode
4
When you have finished with the editing, press [EXIT].
The top screen appears.
5
After making the changes, follow the instructions in "Storing (Saving)
Patches" (p. 44) to save the setting to a patch.
Set the Patch Name
1
In the Patch mode's top screen, press PARAMETER [
2
Press PARAMETER [
3
Press PARAMETER [
enter the characters.
Storing (Saving) Patches
To store patches you have created in memory, carry out the Write procedure.
1
In the Patch mode's top screen, press [WRITE].
2
Press VALUE [
press [WRITE].
3
"Sure?" appears in the display; press [WRITE] once more.
The set value is saved, and the FC-300 returns to the top screen.
44
] [
] to select "Patch Name."
] to move the cursor, and press VALUE [
] [
] to select the save-destination patch number, then
].
] [
] to
The settings made for the
pedals are lost when the patch
is switched. To save settings
made for the pedals, save them
as a patch. For more detailed
information, see "Storing
(Saving) Patches" (p. 44).
Patch names can be up to 12
characters in length.
When you press [INS], inserts
a blank space at the cursor
location. When you press
[DEL], deletes a character at
the cursor location.
Patch names are indicated in
the top screen in Patch Mode.