Editing Midi Streams - Roland FC-300 Owner's Manual

Patch Mode

Editing MIDI Streams

1
In the Patch Mode's top screen, press PARAMETER [
2
Use the PARAMETER [
want to edit, then press [WRITE].
3
"Edit MIDI" appears in the screen; press [WRITE].
The screen for selecting the MIDI stream editing function appears.
The following display appears when the message is not assigned.
Message Number
4
Use the VALUE [
to be edited.
If you are adding any message, press [INS]. The message is added before the number
of the currently selected message.
To delete a message, select the message number with VALUE [
[DEL].
5
Use the following procedures to edit the MIDI stream for different types of
messages.
34
] and [ ] buttons to select the MIDI stream you
] and [ ] to select the message number for the message
].
] [ ] then press
You can select only one point
to which no messages at all are
assigned.