Other Features; Setting The System Parameters; Adjusting The Lcd Contrast; Reducing Battery Consumption (Economy Mode) - Roland FC-300 Owner's Manual

Other Features

Setting the System Parameters

Set the system parameters with the following procedure.
1
Press [UTILITY].
The [UTILITY] indicator lights, and the Utility screen appears in the display.
2
Press PARAMETER [
Parameters that can be set and their screens are described in the next section.
3
Press VALUE [
4
When you've finished making the settings, press [UTILITY] or [EXIT].
The data is saved, and FC-300 returns to the top screen.

Adjusting the LCD Contrast

Depending on where the FC-300 is placed, the display (on the right) may become
difficult to read.
If this occurs, adjust the display contrast.
1
Press PARAMETER [
2
Press VALUE [
3
When you've finished making the settings, press [UTILITY] or [EXIT].

Reducing Battery Consumption (Economy Mode)

When the FC-300 is run on battery power, setting Economy Mode to ON enables
approximately 1.8 times continuous running time of the normal FC-300's operating
mode.
1
Press PARAMETER [
2
Press VALUE [
3
When you've finished making the settings, press [UTILITY] or [EXIT].
46
] [ ] to call up the parameter you want to set.
] [ ] to set the various parameters.
] [ ] to select "SYS:LCD Contrast."
] [ ] to adjust the contrast.
] [ ] to select "SYS:Economy Mode."
] [ ] to switch Economy Mode on and off.
The display and indicators
may flicker when Economy
Mode is set to ON, but this
does not indicate a
malfunction.