Creating Patches - Roland FC-300 Owner's Manual

Creating Patches

In the Patch Mode's top screen, when press PARAMETER [
setting screens appear in the display. Press PARAMETER [
parameter you want to change.
The patch can set the following parameters.
• Patch's ON Stream
• Patch's OFF Stream
• The Transmit timing of the patch's Off Stream
• ON Stream of the CTL pedal 1, 2
• OFF Stream of the CTL pedal 1, 2
• Amp Control
• Control Pedal, Expression Pedal, and Other Settings
• Patch Name
You can assign the following messages to ON streams and OFF streams.
Message
Channel Program Change Message
Message
Control Change Message
Note On/Note Off Message
Channel Pressure Message
Polyphonic Key Pressure Message
Pitch Bend Message
Realtime Message
System Exclusive Message
], the various pedal
] [ ] to select the
Display
PC
CC
N.ON/N.OFF
C.PRS
K.PRS
P.BEND
REALTIME MIDI START
MIDI STOP
MIDI CONTINUE
SYSEX
Patch Mode
If you switch patches before
saving the MIDI messages you
have input to the patch, any
edited content is lost. To save
the changes you have made,
carry out the Write procedure,
refer to "Storing (Saving)
Patches" (p. 44).
33