ELEC
Checking the thermoswitch
1. Place the thermoswitch in a container of
water and slowly heat the water.
2. Check the switch for continuity at the
specified temperatures. Replace if out of
specification.
a Temperature
b Time
c No continuity
d Continuity
Thermoswitch continuity
temperature:
Pink (P) — Black (B)
e: 84 — 90 °C (183 — 194°F)
f: 60 — 74 °C (140 — 165°F)
Checking the warning indicator
1. Disconnect the warning indicator connec-
tor.
2. Check that the indicator for continuity.
8-13
Electrical systems
69D80090
cC
Make sure use the 1.5 V dry sell battery,
other than higher voltage batteries will be
burnt the diode.
NOTE:
LED has an direction for electrical current.
Therefore try reverse connection if there is no
lighting.
Checking the engine stop lanyard
switch (MHD, WHD)
1. Check the engine stop lanyard switch for
continuity. Replace if there is no continu-
ity.
Switch position
Clip removed a
Clip installed b
Engine shut-off
button pushed c
6B480160
Lead color
White (W) Black (B)
69D5G11