Auto Cycle - Ricoh Priport JP8000 Operating Instructions Manual

Auto Cycle

Use the {Auto Cycle} key to process
masters and make prints in a single
operation.
Note
❒ When you use the optional docu-
ment feeder, it is not necessary to
place originals one by one. All
originals are fed and prints are
completed after you press the
{Start} key.
A
Place your original on the expo-
sure glass or in the optional docu-
ment feeder.
Note
❒ You can place up to 50 originals
into the optional document
feeder.
B
Enter the number of prints re-
quired with the number keys.
C
Press the { { { { Start} } } } key.
D
Check the image position of the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
= = ] key (⇒ P.23 "Adjusting the
= =
Position of Printed Images").
E
Press the { { { { Auto Cycle} } } } key.
F
Press the { { { { Print} } } } key.
Note
❒ Repeat steps A through C until
all originals are printed when
you are placing originals on the
exposure glass.
❒ If you placing the original in the
optional document feeder, orig-
inals are fed and prints are com-
pleted automatically.
Auto Cycle
1
49