Ricoh Priport JP8000 Operating Instructions Manual page 165

No. Mode
17 Auto Separate
18 Ink/Master Left
19 Type of Paper
20 Auto Rotation
21 Master length
27 Cancel Stor.O.lay Specifies whether settings for Storage Overlay are retained, or
Description
Specifies whether Job Separation mode is automatically carried
out when you make prints in All Class, Auto Class, Manual Class,
or Class mode.
Note
❒ Default: ON
Specifies whether you can check the amount of ink and master.
Note
❒ Default: OFF
❒ Available settings:
• OFF (You cannot check the remaining amount of ink or
master.)
• ON (When the remaining amount of ink or master is less
than half, the panel display indicates these amounts when
you turn on the main switch.)
• Check remaining volume (You can see the remaining
amounts of ink and master regardless of these amounts.)
When one kind of paper misfeeds occur frequently, you can reg-
ister its paper type in "User1" or "User2".
Reference
For registering a special paper type, ⇒ P.155 "4-19 Type of Pa-
per".
When the direction in which your original is placed differs from
that of the paper, the machine automatically rotates the original
image by 90° to match the paper direction. You can cancel this
setting.
Note
❒ Default: ON
The machine determines the master length according to the num-
ber of originals placed in the optional document feeder and the
paper sizes. If you wish to use A3/11" × 17" master regardless of
the number of originals set and the paper sizes, select "A3".
Note
❒ Default: Auto
not, when a storage overlay job has finished.
Note
❒ Default: Not to cancel
User Tools Menu
4
145