Optional Functions; Optional Document Feeder; Originals - Ricoh Priport JP8000 Operating Instructions Manual

Optional Document Feeder

Insert a stack of originals in the docu-
ment feeder. It will be fed automati-
cally.

Originals

Placing the following originals in the
document feeder might cause mis-
feeds or damage to the originals.
Place the following kinds of originals
on the exposure glass:
• Originals heavier than 128g/m
• Originals lighter than 52g/m
• Originals smaller than 148mm ×
210mm, 5.9" × 8.3"
• Originals larger than 297mm ×
864mm, 11.6" × 34.0"
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased origi-
nals
• Originals with any kind of coating,
such as thermal fax paper, art pa-
per, aluminum foil, carbon paper,
or conductive paper
• Bound originals such as books
• Damaged originals
• Originals with glue on them
• Pasted originals
• Originals written in pencil
• Thin originals that are a little stiff
• Originals with index tabs
• Transparent originals such as OHP
transparencies or translucent pa-
per

2. Optional Functions

The following original sizes placed in
the document feeder can be detected.
❒ Place originals after correction flu-
2
, 34 lb
2
, 14 lb
For standard printing functions, set
originals as shown below.
If the original is place in a different di-
rection from the print paper, the ma-
ch ine au tom atically rotates th e
original image by 90° to match the
print paper direction.
You cannot place originals of differ-
ent sizes at the same time.
When you use thin originals, place
one original at a time in the document
feeder or place them on the exposure
glass.
A3 L, B4 L, A4 KL,
Metric version
B5 KL, A5KL
11" × 17" L, 8
Inch version
L, 8
1
× 8
1
/
2
Note
id and ink have completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be printed.
R
R
" × 14"
1
/
2
" × 11"KL, 5
1
/ / "
2 2
"KL
GRSETT1E
123