Stamp - Ricoh Priport JP8000 Operating Instructions Manual

Operation

Stamp

1
R
One of the following 3 messages can
be stamped on prints.
CONFIDENTIAL
PRIORITY
PRELIMINARY
Limitation
❒ Only one message can be stamped
at a time.
Note
❒ You can change some Stamp set-
tings (size, density, or position)
with the user tools. See "Size",
"Stamp Density", "Stamp Posi-
tion" ⇒ P.146 "5. Stamp".
❒ The message "CONFIDENTIAL"
is selected as a default. You can
change this setting with the user
tools. See "Type" ⇒ P.146 "5.
Stamp".
A
Press the { { { { Stamp} } } } key.
Skip Feed
112
Priority
R
Preliminary
Confidential
GRSTAM0E
Image Density
Stamp
Lighter On Line
Normal
Darker 1
Make-Up Auto On Line
Darker 2
Over lay
Economy Mode
Edge Erase Original Storage
Job Separator
ZDZS100N
B
Select [Stamp] with the [← ← ← ← ] [→ → → → ] or
{ { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys.
C
Press the [OK] key.
D
Select the desired message with
the [← ← ← ← ] [→ → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys.
E
Press the [OK] key.
F
Select the page to be stamped
with the [← ← ← ← ] [→ → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys.
G
Press the [OK] key.