Set Operat'n Mode - Ricoh Priport JP8000 Operating Instructions Manual

User Tools
No. Mode
7 Data Print
8 Energy Saving
4

2. Set Operat'n Mode

No. Mode
1 Min. Quantity
2 Max. Quantity
3 CopyCount Dis-
play
5 Panel Beeper
6 LCD Contrast
144
Description
Use to print out the following data.
Note
❒ Available settings:
• Log Data (Number of prints made, how many times paper
misfeeds occur and so on.)
• Reset Counters (Number of prints and master made under
each user code.)
• Store Class (Registered number of students in each class.)
You can set the time until the Energy Saver mode starts.
Note
❒ Default: 3 Min. (minutes)
Description
The minimum print quantity can be set between 0 and 9999.
Example: If you specify 20 as the minimum number of prints, runs
of 20 or more prints will be accepted, print runs of less than 20
prints will not be accepted.
Note
❒ Default: 0
The maximum print quantity can be set between 0 and 9999.
Note
❒ Default: 9999
The counter can be set to show the number of prints made (Up),
or the number of prints left to be made (Down).
Note
❒ Default: Down
Turns the beeper on or off.
Note
❒ Default: STD. (standard)
❒ Available settings:
• ALL OFF (The beeper does not sound when you press keys
or when warning messages appear on the panel display.)
• STD. (When you press a key, the beeper does not sound.
When warning messages appear on the panel display, the
beeper sounds.)
• ALL ON (The beeper sounds when you press a key or
when warning messages appear on the panel display.)
You can adjust the brightness of the panel display.