Directional Magnification (Size) - Ricoh Priport JP8000 Operating Instructions Manual

Operation

Directional Magnification (Size)

Use this function to have the machine
select suitable reproduction ratios
1
based upon the dimensions of the
print you require and the size of the
original you specify.
1
2
1. Horizontal original size
2. Vertical original size
3. Horizontal print size
4. Vertical print size
Note
❒ You can enter sizes within the fol-
lowing ranges.
Metric ver-
sion
Inch version
❒ The range of ratios which the ma-
chine can select depends on where
you place the original:
• On the exposure glass: 50-200%
❒ If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of ratios automatically.
38
3
4
CP2M01EE
1 - 999mm (in 1mm steps)
0.1" - 99.9" (in 0.1" steps)
A A A A
Press the [Ratio] key.
B B B B
Select [Mag.] with the [→ → → → ] or { { { { } } } } } } } }
key.
C C C C
Press the [OK] key.
D D D D
Select [Direct.Mag.(Size)] with the
[→ → → → ] or { { { { } } } } } } } } key.
E E E E
Press the [OK] key.