Ricoh Priport JP8000 Operating Instructions Manual page 108

Operation
- Notes -
- -
The image might differ depending on how the designated area is drawn, so re-
member the following when making the command sheet:
1
Designated area
Part of the designated area is
surrounded by 3 sides of the en-
tire area.
Double line pattern.
The designated area is sur-
rounded by 3 sides of another
designated area.
Non-closed line
88
Area recognized
Only the outer line is
recognized.
Preferred designated area
Make a space of at least 2mm,
0.08", in front of the area surround-
ed by 3 sides (relative to the feed
direction).
1
1, 2 = 2mm, 0.08"
Make a gap of at least 2mm, 0.08"
in width.
Make a space of at least 2mm, 0.08"
in front of the area surrounded by
3 sides (relative to the feeding di-
rection).
2
1
1, 2 = 2mm, 0.08"
Designate the area with a closed
line.
2