Clearing Misfeeds - Ricoh Priport JP8000 Operating Instructions Manual

x Clearing Misfeeds
R CAUTION:
• Be careful not to cut
yourself on any sharp
edges when you
reach inside the ma-
chine to remove mis-
fed sheets of paper or
masters.
Note
❒ After clearing misfeeds, make sure
that all the doors, covers, and units
are closed and the x indicator is
off.
❒ To prevent misfeeds, do not leave
any torn scraps of paper, originals,
or masters in the machine.
❒ When clearing misfeeds, do not
turn off the main switch. If you do,
your print settings will be cleared.
❒ If
misfeeds occur
please contact your service repre-
sentative.
x + A" Paper Misfeeds in the
x x
"x
Paper Feed Section
A
Remove the misfed paper.
- To prevent paper misfeeds: - - -
Check the following before restarting
the printing run.
• Did you select an appropriate pa-
per type with the [Ppr.Type] key?
repeatedly,
• Are the side pads in the correct po-
sitions?
To print on thin paper (47.1g/m
12.5 lb), slide the levers behind the
paper feed side plates in the direc-
tion of the arrow (see illustration).
x Clearing Misfeeds
ZDCY140E
2
,
169
5