Directional Magnification (Size) - Ricoh Priport JP5500 Operating Instructions Manual

Operation

Directional Magnification (Size)

Use this function to have the machine
select suitable reproduction ratios
1
based upon the dimensions of the
print you require and the size of the
original you specify.
1. Horizontal original size
2. Vertical original size
3. Horizontal print size
4. Vertical print size
Note
❒ You can enter sizes within the fol-
lowing ranges.
Metric
version
Inch version
❒ The range of ratios which the ma-
chine can select depends on where
you place the original:
• On the exposure glass: 50-200%
❒ If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of ratios automatically.
38
1 - 999mm (in 1mm steps)
0.1" - 99.9" (in 0.1" steps)
A A A A
Press the [Ratio] key.
B B B B
Select [Mag.] with the [→ → → → ] or { { { { } } } } } } } }
key.
C C C C
Press the [OK] key.
D D D D
Select [Direct.Mag.(Size)] with the
[→ → → → ] or { { { { } } } } } } } } key.
E E E E
Press the [OK] key.