4. Registering Addresses and Users
1.
Press the [Home] key on the bottom left of the control panel, and press the [Address Book
Management] icon on the [Home] screen.
If the [Address Book Management] icon does not appear, press the
corner of the screen to switch to the [Home] screen.
2.
Check that [Program / Change] is selected.
3.
Select the user whose user code you want to change.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name or user code.
4.
Press [Auth. Info].
5.
Press [Change] under "User Code".
6.
Enter the new user code using the number keys, and then press the [ ] key.
7.
Press the key to select the functions to enable them.
8.
Press [OK].
9.
Press the [User Tools] key.
• To change the name, key display and title, see page 115 "Registering User Information".
Deleting a User Code
• After clearing the user code, the counter is automatically cleared.
1.
Press the [Home] key on the bottom left of the control panel, and press the [Address Book
Management] icon on the [Home] screen.
If the [Address Book Management] icon does not appear, press the
corner of the screen to switch to the [Home] screen.
2.
Check that [Program / Change] is selected.
122
icon at the upper right
icon at the upper right