Genie S-65 Operator's Manual page 30

Operator's Manual
OPERATING INSTRUCTIONS
Check Engine Light
Light on and engine stopped: Tag
the machine and remove from
service.
Light on and engine still running:
Contact service personnel within 24
hours.
Platform Overload Indicator
Light (if equipped)
Light flashing indicates the
platform is overloaded and no
functions will operate.
Remove weight from the platform
until the light goes off.
Machine Not Level Indicator
Light (if equipped)
Light on indicates machine is not level.
The tilt alarm will be sounding when
this light is on. Move the machine to a
firm level surface.
28
Machine Malfunction Indicator
Light
1 Push in and then pull out the red Emergency
Stop button.
2 Lower and retract the boom.
3 Tag the machine and remove from service.
Functions will not operate.
Fall Protection
Personal fall protection equipment (PFPE) is
requred when operating this machine.
All PFPE must comply with applicable
governmental regulations, and must be inspected
and used in accordance with the PFPE
manufacturer's instructions.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is between
the non-steer wheels.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.
Genie S-60 & Genie S-65
Third Edition • Second Printing
Light on indicates all functions have
stopped.
Part No. 82407