Genie S-65 Operator's Manual page 19

Third Edition • Second Printing
Check the Tire Pressure
This procedure does not need
to be performed on machines
equipped with foam-filled tires.
Bodily injury hazard. An over-
inflated tire can explode and could
cause death or serious injury.
Tip-over hazard. Do not use
temporary flat tire repair products.
To safeguard maximum stability, achieve
optimum machine handling and minimize tire
wear, it is essential to maintain proper pressure
in all air-filled tires.
1 Check each tire with an air pressure gauge. Add
air as needed.
Tire pressure
High flotation tire pressure
Part No. 82407
70 psi 4.92 bar
60 psi 4.21 bar
Genie S-60 & Genie S-65
Scheduled Maintenance
Maintenance performed quarterly, annually and
every two years must be completed by a person
trained and qualified to perform maintenance on this
machine according to the procedures found in the
service manual for this machine.
Machines that have been out of service for more
than three months must receive the quarterly
inspection before they are put back into service.
Operator's Manual
MAINTENANCE
17