Table of Contents
Advertisement
Viewing Device Data
Figure 22. M2X Stream Data
Note: On the default Factory Configuration, ALL sensors are enabled.
Note: The Device can be identified via the Serial Number printed on the back.
5.2
View Data in AT&T Asset Management Operation Center
(AMOC)
Monitor, manage, and analyze data from Sonim XPi device with AT&T Asset
Management Operation Center (AMOC) – A simple intuitive web based tool. View
sensor data such as temperature, humidity, geographical coordinates, peak shock,
battery charge for multiple Sonim XPi devices and also set alerts to spot and resolve
issues before they affect operations. Access to AMOC is included in the monthly
subscription plan for Sonim XPi. AMOC can be accessed at AT&T IoT Marketplace
https://marketplace.att.com/
Refer to
December 2017
Document Number: 336569 Rev 1.0
after the device has been purchased.
Appendix E: AT&T Asset Management Operation Center
for details.
§
Sonim* XPi
User Guide
31
Advertisement
Table of Contents
