Table of Contents
Advertisement
RENAME THIS DEVICE
1.
From the Bluetooth screen, tap on Option (
Rename this device to rename the selected device.
2.
Enter the name and tap on RENAME.
SHOW RECEIVED FILES
From the Bluetooth screen, tap on Option (
received files to view the received files.
The received files are listed.
CARKIT AUTO-PAIRING
1.
From the Bluetooth screen, check Option (
CarKit Auto-Pairing.
2.
Select Yes as phone automatically connects to
the carkit when connecting to dock.
DATA USAGE
Data usage refers to the amount of data utilized by your
phone during data transfers through the Internet. The
data usage charges are dependent of the wireless plan
provided by your service provider.
To monitor your data usage, adjust your data usage
settings.
1.
From Apps menu, tap on Settings (
2.
Tap on Data usage (
Wireless & networks settings.
3.
Under Usage, you can view the data usage for a
particular time frame.
4.
Turn on Data saver to access unrestricted data.
5.
Turn on Cellular Data to access data for Internet
access.
6.
Select Wi-Fi > Wi-Fi data usage to check the
data usage for a particular time frame.
7.
Tap on Network Restrictions to view the
metered networks listed.
MORE
AIRPLANE MODE
When your phone is set in airplane mode, network
connectivity or mobile data connectivity is disabled.
But you can access your camera, media files and other
features that do not require mobile connectivity.
To activate airplane mode:
1.
From App menu, tap on Settings (
2.
Tap on More located under Wireless & networks
settings.
MANAGING WIRELESS & NETWORKS SETTINGS
) >
) > Show
) >
).
), which is located under
).
3.
Turn on Airplane mode.
NFC
NFC (Near-Field Communication) is a set of
communication protocols that enable two electronic
devices, one of which is usually a portable device such as
a smartphone to establish a communication by bringing
them within 4 cm of each other.
1.
From App menu, tap on Settings (
2.
Tap on More located under Wireless & networks
settings. Turn on NFC to allow data exchange
when the phone touches another device.
WI-FI CALLING
Wi-Fi calling is a service for phones providing the ability
to make and receive phone calls over a Wi-Fi connection.
It is simple to use with no seperate application or log-in
required.
• Initially when the phone is switched ON, Wi-Fi
calling has to be updated with the emergency
address and other information, and the same has to
be saved.
• To enable WI-Fi calling, initially Wi-Fi should be
enabled or else a messaged pops-up to enable
Wi-Fi.
• If Wi-Fi setup is not completed, a message is
displayed as WI-Fi Calling Activation; Setup was
not completed under My Notifications.
• If Wi-Fi setup is completed, the Wi-Fi Calling is
activated and VoWIFi (
notification bar.
1.
From App menu, tap on Settings (
2.
Tap on More located under Wireless & networks
settings.
3.
Tap on Wi-Fi calling.
4.
Toggle the Wi-Fi calling button.
When Wi-Fi calling is ON, your phone can route
calls through W-Fi network or your carrier network,
depending on the signal strength and your
preferencess.
ANDROID BEAM
1.
From App menu, tap on Settings (
2.
Tap on More located under Wireless & networks
settings. Turn ON to beam app content to another
NFC capable device by holding the devices close
together.
).
) icon is displayed on the
).
) .
19
Advertisement
Table of Contents
