Using the Intel® Device Management Service
4.2.3
Configure Device(s)
Click the 'Device Name' on the 'Devices' tab to view the current device configuration.
Configuring a device allows users to:
•
Change the device name, if needed
Reset all settings to factory defaults
•
•
Enable or disable each of the sensors via the On/ Off Status toggle
Change the sensor reading frequency for each sensor. This refers to the frequency
•
at which the data from each sensor is read.
•
Change the reporting interval, that is, how often data collected by the sensors is
sent to the cloud.
4.2.3.1
Default Configuration
Devices are shipped with default configuration settings as shown in Figure 16.
Figure 16. Device Configuration Panel
December 2017
Document Number: 336569 Rev 1.0
Sonim* XPi
User Guide
25